聚丁烯-1的改性研究进展Developments Progress of Polybutene-1 Modification
刘珍;陈骏逸;韩雷;赵永仙;
摘要(Abstract):
综述了国内外聚丁烯-1(PB-1)物理和化学方法改性的研究现状,阐述了PB-1共聚、填充、共混改性方法,同时介绍了PB-1改性后的性能和具体的特征,并指出了存在的问题及其发展前景。
关键词(KeyWords): 改性;聚丁烯-1;性能;共聚;填充;共混;述评
基金项目(Foundation): 国家自然科学基金(No.51243002);; 山东省自然科学基金(ZR2010EM025);; 青岛市科技发展计划[No.12-1-4-3-(1)-JCH];; (国家质检总局)公益性行业科研专项(No.20100009)资助
作者(Author): 刘珍;陈骏逸;韩雷;赵永仙;
Email:
DOI:
参考文献(References):
- [1]Claudio De Rosa,Finizia Auriemma,Paolo Vollaro,et al.Crystallization behavior of propylene-butene copolymers:The trigonal form of isotactic polypropylene and form I of isotactic poly(1-butene)[J].Macromolecules,2011,44(3):540-549.
- [2]He Aihua,Shi Yangwei,Liu Guoqing,et al.Preparation and characterization of spherical PP/PB alloys with MgCl2-supported Ziegler-Natta catalyst[J].Chinese Journal of Polymer Science,2012,30(5):632-641.
- [3]许春生,邵华锋,姚薇,等.1-丁烯和少量丙烯共聚物的室温结晶性能[J].现代塑料加工应用,2009,21(5):30-32.
- [4]Young Soo Ko,Jong-Ki Jeon,Jin-Heong Yim,et al.Chemical compositional distribution of ethylene-1-butene copolymer prepared with heterogeneous Ziegler-Natta catalyst:TREF and crystal analysis[J].Macromolecular Research,2009,17(5):296-300.
- [5]胡锦民,王海华,麦堪成.新型高效催化剂乙烯/1-丁烯气相齐聚和共聚制备弹性体及其结构与性能关系[J].高等学校化学学报,2000,21(4):643-646.
- [6]林少全,萧翼之,胡锦民,等.镍二亚胺配合物-TiCl4复合催化剂制备新型乙烯-1-丁烯共聚产物结构性能研究[J].高分子材料科学与工程,2002,18(4):42-44.
- [7]王波,姚薇,赵永仙,等.负载钛体系催化1-丁烯与1-己烯共聚合[J].合成橡胶工业,2006,29(6):429-434.
- [8]刘晓晗,刘晨光,姚薇,等.用负载钛催化剂催化1-丁烯与乙烯基降冰片烯共聚合[J].合成橡胶工业,2011,34(1):51-54.
- [9]马玉杰,赵永仙,姚薇,等.DCP引发高全同聚丁烯-1熔融接枝马来酸酐[J].高分子材料科学与工程,2010,26(11):5-8.
- [10]Hisayuki Nakatani,Masashi Ogura,Takanori Yoshikawa,et al.Preparation of polybutene-1/multiwallcarbon nanotube composite by oxidation and limonene radical grafting and its characterization[J].Polymer International,2011,60(11):1614-1623.
- [11]Marcus Schoβig,Christian Bierogel,Wolfgang Grellmann,et al.Mechanical behavior of glass-fiber reinforced thermoplastic materials under high strain rates[J].Polymer Testing,2008,27(7):893-900.
- [12]刘乐文,李聪,陶四平,等.聚丁烯对增强聚丙烯浮纤现象的改善[J].塑料工业,2012,40(4):111-114.
- [13]唐伟,王旭,蔡晓良.聚丁烯(PB)/石墨复合材料的性能研究[J].塑料工业,2006,34(9):7-9.
- [14]Santosh D W,Jog J P.Poly(1-butene)/clay nanocomposites:preparation and properties[J].Journal of Polymer Science,2003,41(10):1014-1021.
- [15]张俊平,杨继搞,薛美玲.聚丁烯-1/高岭土纳米复合材料的力学性能及其非等温结晶动力学研究[J].青岛科技大学学报,2011,32(2):145-149.
- [16]Cham P M,Lee T H,Marand H.On the state of miscibility of isotactic poly(propylene)/isotactic poly(1-butene)blends:Competitive liquid-liquid demixing and crystallization processes[J].Macromolecules,1994,27(15):4263-4273.
- [17]Kishore K,Vasanthakumari R.Crystallization behaviour of polyethylene and i-polybutene-1 blends[J].Polymer,1986,27(3):337-343.
- [18]Michael Nase,Armin Zankel,Beate Langer,et al.Investigation of the peel behavior of polyethylene/polybutene-1peel films using in situ peel tests with environmental scanning electron microscopy[J].Polymer,2008,49(25):5458-5466.
- [19]Michael Nase,RenéAndrosch,Beate Langer,et al.Effect of polymorphism of isotactic polybutene-1 on peel behavior of polyethylene/polybutene-1 peel systems[J].Journal of Applied Polymer Science,2008,107(5):3111–3118.
- [20]赵永仙,王吉辉,杜爱华,等.PP/iPB共混物的性能[J].合成树脂及塑料,2008,25(2):67-69.
- [21]Maurizio Canetti,Alberto Seves,Laura Bergamasco,et al.Morphology and supermolecular structure of polypropylene-poly(1-butene)-hydrogenated oligo(cyclopentadiene)ternary blends[J].Journal of Applied Polymer Science,1998,68(11):1877-1882.
- [22]郭建明,黄恒梅.聚丁烯在改性聚苯醚中的应用[J].塑料工业,2009,37(S1):7-9.
- [23]Li Lei,Liu Tao,Zhao Ling.Direct fabrication of porous isotactic poly-1-butene with form I from the melting using CO2[J].Macromolecular Rapid Communications,2011,32(22):1834-18383.
- [24]许春生,王召栋,姚薇,等.Mult-920成核剂对iPB晶型转变速率的影响[J].现代塑料加工应用,2010,22(5):29-32.
- [25]赵永仙,王吉回,姚薇,等.成核剂对PB-TPE结晶行为和力学性能的影响[J].高分子材料科学与工程,2010,26(11):56-58.