长纤维/热塑性塑料直接注射成型的研究进展Research Progress of Direct Injection Molding for Long Fiber / Thermoplastic Resin
田宁;张亚军;金志明;王凯;张奇;
摘要(Abstract):
介绍了近年来长纤维/热塑性塑料直接注射成型技术设备的发展现状,并综述了纤维直接喂入注射成型技术中的注塑工艺、设备结构、纤维含量等因素对长纤维增强热塑性复合材料注塑制品性能的影响。
关键词(KeyWords): 长纤维;热塑性树脂;在线配混挤注成型;纤维直接喂入注射成型
基金项目(Foundation):
作者(Authors): 田宁;张亚军;金志明;王凯;张奇;
DOI: 10.19690/j.issn1004-3055.20190174
参考文献(References):
- [1] 贾明印,薛平,于建,等.长纤维增强热塑性复合材料技术与设备的研究 [J].工程塑料应用,2010,38(10):83-86.
- [2] MALANATI P.Driving examples:greater composites use in passenger vehicles[J].Plastics Engineering,2014,70(7):8-13.
- [3] 吴利华,袁宇慧.先进纤维增强复合材料在大型客机上的应用现状[J].兵器材料科学与工程,2018,41 (3):100-103.
- [4] TEIXEIRA D,GIOVANELA M,GONELLA L B,et al.Influence of flow restriction on the microstructure and mechanical properties of long glass fiber-reinforced polyamide 6.6 composites for automotive applications[J].Materials & Design,2013,47(5):287-294.
- [5] SCHEMME M.LFT-development status and perspectives[J].Reinf Plast,2008,52 (1):32-39.
- [6] HAWLEY R C,JONES R F.In-line compounding of long-fiber thermoplastics for injection molding[J].J Thermoplast Compos Mater,2005,18 (5):459-464.
- [7] FRANCLA D R,Jen C K,NGUYEN K T,et al.Ultrasonic in-line monitoring of polymer extrusion[J].Polym Eng Sci,2000,40 (1):82-94.
- [8] KNIGHTS,MIKELL.D-LFT in-line compounding & molding:new equipment provides easier entry[J].Plastics Technology,2006,52(12):30-31.
- [9] 张友根.在线配混复合材料的塑化注射系统的研究[C]//中国塑料技术产业化研讨会暨2009中国塑协塑料技术协作委员会/工程塑料专委会年会论文集.余姚:[出版者不详],2009.
- [10] 刘际泽.碳纤维复合材料专用注射成型机[J].塑料,2012,41(6):120-120.
- [11] TRUCKENMULLER F,FRITZ H G.Injection molding of long fiber-reinforced thermoplastics:A comparison of extruded and pultruded materials with direct addition of roving strands[J].Polymer Engineering & Science,1991,31(18):1316-1329.
- [12] TAKEMATSU R,UAWONGSUWAN P,INOYA H,et al.Direct fiber feeding injection molding of glass fiber reinforced polycarbonate[J].ABS Polymer Blends Composites,2015,451:456.
- [13] Mitsubishi Heavy Industries Plastic Technology Co.,Ltd.Injection molding method,screw,and injection molding machine:US 20170015036A1[P].2017-01-19.
- [14] YAN X,CUI Z,IMAJO A,et al.Mechanical properties of glass fiber/basalt fiber reinforced polypropylene hybrid composites fabricated by direct fiber feeding injection molding process[C]//Manufacturing & processing technologies,proceeding of the 2016 composites and advanced materials expo conference.Anaheim:[s.n.],2016.
- [15] YAN X,SHEN H,YU L,et al.Polypropylene-glass fiber/basalt fiber hybrid composites fabricated by direct fiber feeding injection molding process[J].Journal of Applied Polymer Science,2017,134(44):45472.
- [16] THODSARAPREEYAKUL W,KATAOKA A,ICHIKAWA H,et al.Study on the effective of utilization in vent-type injection molding[J].Key Engineering Materials.2017,728:277-282.
- [17] SUCHALINEE M,PUTINUN U,SATOSHI N,et al.The effect of processing parameter on mechanical properties of short glass fiber reinforced polyoxymethylene composite by direct fiber feeding injection molding process[J].Energy Procedia,2016,89:255-263.
- [18] HISAKURA Y,KITAHARA K,SUGIHARA M,et al.Mechanical properties of GF/CF hybrid ABS composite by DFFIM[J].Key Engineering Materials.2017,728:240-245.
- [19] YAN X,YANG Y,HAMADA H.Tensile properties of glass fiber reinforced polypropylene composite and its carbon fiber hybrid composite fabricated by direct fiber feeding injection molding process[J].Polymer Composites.2018,39(10):3564-3574.
- [20] WIRANPHAT T,PUTINUN U,AKIO K,et al.Damage behavior of low velocity impact test on glass fiber reinforced poly (ethylene terephthalate) composites[J].Materials Today:(Proceedings),2018,5(3):9569-9578.