提高塑料注塑件融合缝强度的研究进展Advances in Improvement of Weld Line Strength of Injection-Molded of Plastic Parts
陆昶,高喜平,彭淑鸽,刘继纯,张玉清
摘要(Abstract):
塑料在注射成型过程中会生成融合缝,融合缝会导致塑料注射件的强度下降。简述了了融合缝的形成机理及危害,概括了融合缝导致无定形聚合物、结晶聚合物及共混物制品强度下降的机理,并重点阐述了提高塑料注射件融合缝强度的方法。
关键词(KeyWords): 融合缝;注塑件;强度;塑料
基金项目(Foundation): 河南科技大学人才科研基金(05-071);; 校科研基金(2006ZY029)项目
作者(Author): 陆昶,高喜平,彭淑鸽,刘继纯,张玉清
参考文献(References):
- 1 Piccarolo S,Rallis A,Titomanlio G.Effect of injectionmolding conditions on knit-line formation.Plast RubberProcess Appl,1987,8(3):181~184
- 2 Selden R.Effect of processing on weld line strength in fivethermoplastics.Polym Engin Sci,1997,37(1):205~218
- 3 Debondue E,Fournier J E,Lacrampe M F,et al.Weld-linesensitivity of injected amorphous polymers.J Appl PolymSci,2004,93(2):644~650
- 4 Pecorini Thomas J.Fracture mechanics approach to weld-line fracture in an amorphous cellulose acetate propionate.Polym Engin Sci,1997,37(2):308~314
- 5 Tjader T,Seppala J,Jaaskelainen P.Effect of materialcharacteristics of polyolefins on weld line morphology andits correlation to mechanical properties.J Mater Sci,1998,33(4):923~931
- 6 Titomanlio G,Piccarolo S,Rallis A.Knit lines structure ininjection molding of nylon 6:Relation to first solidified sam-ple cross section.Polym Eng Sci,1989,29:209~214
- 7 Mielewski D F,Bauer D R,Schmitz P J,et al.Weld linemorphology of injection molded polypropylene.Polym EngSci,1998,38:2 020~2 028
- 8陆昶,郭少云,文力.尼龙6/聚苯乙烯共混物融合缝的形态及其对力学性能的影响.高分子材料科学与工程,2005,21(1):172~175
- 9 Lu C,Guo S Y,Wang J Y,et al.Weld line morphology andstrength of polystyrene/polyamide-6/poly(styrene-co-maleicanhydride)blends.Europ Polym J,2004,40(11):2 565~2572
- 10申长雨.塑料成型加工讲座(第六讲)—注塑成型制品的质量控制.工程塑料应用,1999,27(8):33~37
- 11 Chung S T,Kwon T H.Numerical simulation of fiber ori-entation in injection molding of short-fiber-reinforced ther-moplastics.Polym Eng Sci,1995,35(7):604
- 12 Liu S J,Wu J Y,Chang J H.Optimizing the weldlinestrength of injection molded liquid crystal polymers.JPolym Engin,2001,21(1):53~66
- 13 Dairanieh I S,Haufe A,Wolf H J,et al.Computer simu-lation of weld lines in injection molded poly(methyl methac-rylate).Polym Eng Sci,1996,36:2 050~2 057
- 14鲁晓梅,赵文彦,申长雨等.塑件熔接线计算机模拟及实验验证.模具工业,2000,15(2):13~15
- 15 Ibar J P.Control of polymer properties by melt vibrationtechnology:A review.Polymer Engineering and Science,1998,38(1):1~20
- 16 Piccarolo S,Scargiali F,Grippa G,et al.Relation betweenpacking flow and mechanical properties of weld zones in in-jection-moulded thermoplastic polymers.Plast RubberComposites Process Appl,1993,19:205~210
- 17 Pour Brian K,Thomas D S.Study of tooling modificationsused to improve weld line properties of polymeric materi-als.ANTEC,1995.495~499
- 18 Lu C,Yu X F,Guo S Y.Ultrasonic improvement of weldline strength of Injection molded polystyrene and polysty-rene/polyethylene blend parts.Polym Engin Sci,2005,45(12):1 666~1 672
- 19 Yu X F,Lu C,Guo S Y.Effect of ultrasonic oscillationson weld line strength of PS,PMMA,and their blends.JAppl Polym Sci,2006,102(3):2 990~2 997