注塑工艺对微发泡PP/云母粉发泡行为影响Effect of Injection Processing on PP/Mica Powder Foaming Behavior
龚维,高家诚,何力,朱建华,何颖,郑环
摘要(Abstract):
用正交试验研究了注射温度、注射压力、注射速度和冷却时间对化学发泡法制备聚丙烯(PP)/云母粉发泡材料的泡孔平均直径和泡孔密度的影响。结果表明,在PP中添加云母粉后,注射压力对发泡PP/云母粉材料的结构参数影响最大,其次为注射温度;较理想的工艺参数为注射温度170℃、注射压力50 MPa、注射速度95%、冷却时间30 s。
关键词(KeyWords): 聚丙烯;云母;微发泡材料;注塑工艺参数;发泡行为
基金项目(Foundation): 贵州省自然基金项目{黔科合J字[2009](2020号)};; 国家973前期项目(200722s700812);; 贵州省教育厅自然科学基金项目(50101050222007)
作者(Author): 龚维,高家诚,何力,朱建华,何颖,郑环
参考文献(References):
- 1 Rodriguez-Perez M A,Velasco J I.Mechanical characterization of closed-cell polyolefin foams.Journal of Applied Polymer Science,2007,75(1):156-166
- 2 Turng L S and Kharbas H A.Effect of conditions on the weld-line strength and microstructure of microcellular injection molded parts.Polymer Engineering and Science,2003, 43(1):15-168
- 3 Wang Chicheng,Karen Cox,Gregory A.Microcellular foaming of polypropylene containing low glass transition rubber oarticles in an injection molding process.Journal of Vinyl and Additive Technology,2006,2(2):167-169
- 4 Baldwin D F,Park C B.Cell morphology and property relationships of microcellular foamed PVC/wood-fibercomposites. Polymer Engineering And Science,2003,38(11): 1 862-1 872
- 5 Zhang Yaolin,Denis Rodrigue.High density polyethylene foams.Polymer and foam characterization.Journal of Applied Polymer Science,2003,90:2 111-2 119
- 6 Chong Hoon Lee,Kijun Lee,Ho Gab Jeong,et al.Growth of gas bubbles in the foam extrusion process.Advances in Polymer Technology,2000,19(2):97-112
- 7袁国定,谭华强.基于注射CAE的分级注射参数设定.中国塑料,2006,20(1):66-70