刘洪,刘方辉,钱心远,张杰

• 1:四川大学高分子科学与工程学院高分子材料工程国家重点实验室

摘要(Abstract)：

介绍了影响微注射成型过程中流变和充填性能的主要因素,重点综述了近年来国内外关于这些影响因素的相关研究情况及进展,同时对该领域今后发展趋势和研究热点进行了展望。

关键词(KeyWords)： 聚合物;微注射成型;流变性能;充填性能;述评

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(50873072);; 国家重点试验室专项经费联合资助

作者(Author): 刘洪,刘方辉,钱心远,张杰

参考文献(References)：

• [1]Chen Chung,Liaw Weiliang.Rheological behavior of POM polymer melt flowing through micro-channels[J].European, Polymer Journal,2008,44:1 891-1 898.
• [2]庄俭.微注塑成型充模流动理论与工艺试验研究[D].大连:大连理工大学,2007.
• [3]Chien R D,Jong W R,Chen S C.Study on rheological behavior of polymer melt flowing through micro-channels considering the wall-slip effect[J].Micromech Microeng, 2005,15:1 389-1 396.
• [4]Vasco J C,Maia J M,Pouzada A S.Thermo-rheological behaviour of polymer melts in microinjection moulding [J].Micromech Microeng.2009,19:1-8.
• [5]Yao Donggang,Byung Kim.Simulation of the filling process in micro-channels for polymeric materials[J].Micromech and Microeng,2002,12:604 - 610.
• [6]庄俭,王敏杰,于同敏.微注塑成型中壁面滑移对熔体充模流动影响的研究[J].中国机械工程,2007,18(16): 1 995-1 999.
• [7]崔恩选.化学工艺学[M].北京:高等教育出版社,2001.
• [8]Yu L Y,Ue L J and Koelling K W.Flow and heat transfers sulation of injection molding with micro structures [J].Polym Eng Sci,2004,44(10):1 566-1 576.
• [9]庄俭,于同敏,王敏杰,等.微注塑成型中对流换热系数对熔体充模流动的影响[J].高分子材料科学与工程,2007, 23(6):169-172.
• [10]Dong Sung Kim,Kwang-Cheol Lee,Tai Hun Kwon,et al.Micro-channel filling flow considering surface tension effect[J].Micromech and Microeng,2002,12:236 - 246.
• [11]于同敏,李又民,徐斌.微注塑成型充模流动中的表面张力[J].高分子材料科学与工程,2009,25(12):152- 157.
• [12]Tune G.Bayazitoglu Y.Heat transfer in microtubes with viscous dissipation[J],Int J Heat Mass Transfer,2001, 44(13):2 395-2 403.
• [13]Tsai T H,Yang H and Chien R.High-aspect-ratio microstructure filling by centrifugal force field modeling. Micro Sys Tech,2004,10(6/7):571-577.
• [14]Ong N S,Zhang H,Woo W H.Plastic injection molding of high-aspect ratio micro-rods[J].Mater Manuf Process,2006,21(8).824-831.
• [15]Lin Huangya,Young Wenbin.Analysis of the filling capability to the microstructures[J].Applied Mathematical Modeling,2009,33:3 746-3 755.
• [16]Young W B.Simulation of the filling process in molding components with micro channels[J],Microsys Tech, 2005,11:410-415.
• [17]Nan Shing Ong,Yeow Hwee Koh.Experimental investigation into micro injection molding of plastic parts[J]. Mater Manuf Processes,2005,20:245-253.
• [18]Liou A C,Chen R H.Injection molding of polymer micro and sub-micron structures[J].Int J Adv Manuf Technol,2006,(28):1 097 - 1 103.
• [19]Sha B,Dimov S,Griffiths C,et al.Investigation of micro -injection moulding factors affecting[J].Journal of Materials Processing Technology,2007,183:284 - 296.
• [20]庄俭,吴大鸣,赵中里,等.微注射成型工艺的试验研究[J].化工学报,2009,60(4):1 040-1 045.
• [21]Zhang H L,Ong N S,Lam Y C.Mold surface roughness effects on cavity filling of polymer melt in micro injection molding[J].Int J Adv Manuf Technol,2008, (37):1 105-1 112.