云母粉对聚丙烯微孔发泡行为和力学性能的影响Effects of Mica Powder on PP Micro Foaming Behavior and Mechanical Properties
郑祥;张凯舟;柯昌月;龚维;赵武学;
摘要(Abstract):
将云母粉加入到聚丙烯(PP)中,在二次开模条件下制备微孔发泡PP/云母粉复合材料,分析了不同含量的云母粉对微孔发泡复合材料发泡行为及力学性能的影响。结果表明,当云母粉质量分数为6%时微孔发泡复合材料的泡孔尺寸最小,泡孔密度最大;随着云母粉加入量的增大微孔发泡复合材料的缺口冲击强度略有降低,拉伸强度基本保持不变。
关键词(KeyWords): 微发泡;云母粉;聚丙烯;发泡行为;力学性能
基金项目(Foundation): 贵州大学研究生创新基金项目(校研理工2011047)资助
作者(Authors): 郑祥;张凯舟;柯昌月;龚维;赵武学;
参考文献(References):
- [1]Kumar V,Vandarwel M,Weller J,et al.Experimental characterization of the tensile behavior of microcellar polycarbonate foam[J].J Eng Mat Tech,1994,116(4):439-445.
- [2]吴舜英,徐敬一.泡沫塑料成型[M].北京:化学工业出版社,1992.
- [3]Rodriguez Perez M A,Velasco J I,Arencon D.Me-chanical characterization of closed-cell polyolefin foams[J].Journal of Applied Polymer Science,2007,75:156-166.
- [4]Guo Mingcheng,Heuzey Marieclaude,Pierre J Car-reau.Cell structure and dynamic properties of injection molded polypropylene foams[J].Polymer Engineering and Science,2007,47:1070-1081.
- [5]龚维,高家诚,何力,等.微发泡聚丙烯/晶须复合材料的发泡行为与力学性能[J].高分子材料与工程,2011,27(3):67-70.
- [6]赵武学,何力,朱艳,等.竹粉对微发泡聚丙烯发泡行为的影响[J].现代塑料加工应用,2010,22(4);49-51.